Facilitates the assembly of carbon parts
Road specialist
The Shimano BB-RS500 Press-Fit BB86 is a bottom bracket designed for frames fitted with a standard Press-Fit BB86 and the pedals Shimano compatible with the interface Hollowtech II.
Designed for road drivetrains and bikes fitted with a 24 mm bottom bracket axle, this bottom bracket offers a practical solution for replacing a worn bottom bracket or carrying out maintenance on a drivetrain Shimano.
The BB-RS500 Press-Fit is a suitable solution for cyclists looking for a bottom bracket Shimano reliable, easy to install and compatible with a wide range of pedal sets Shimano Hollowtech II.
The BB86 is a bottom bracket standard in which the cups are pressed directly into the frame.
Unlike a conventional threaded bottom bracket, the Press-Fit system therefore does not require a thread in the bottom bracket shell. The cups are inserted into the designated sockets using a press-fit assembly.
The standard BB86 is characterised, in particular, by a bottom bracket width of 86.5 mm for compatible road bike frames.
Before buying, it is therefore essential to check that the frame is designed to accommodate a gearbox BB86 Press-Fit.
The Shimano The BB-RS500 Press-Fit is designed for cranksets that use the system Hollowtech II with an axis of 24 mm.
This technology Shimano separates the axle function from that of the external bearings or those integrated into the housing, with a bottom bracket axle that is integral with the bottom bracket.
The BB-RS500 thus ensures rotation of the axle whilst maintaining a rigid and precise connection between the crankset and the frame.
The BB-RS500 bottom bracket uses bearings designed to ensure smooth rotation of the bottom bracket spindle.
A well-maintained housing helps to minimise friction and unwanted movement in the crankset. Conversely, worn bearings can cause play, creaking or a less smooth feel when pedalling.
Replacing the gearbox can therefore help to restore quieter and smoother operation of the transmission.
The Shimano BB-RS500 Press-Fit is a practical solution for replacing a housing that is showing signs of wear and tear.
Before fitting, it is recommended that you check the condition of the bottom bracket shell, clean the contact surfaces thoroughly and ensure that the dimensions comply with the BB86 standard.
Fitting a Press-Fit housing also requires a suitable installation tool to position the cups correctly without damaging them.
The BB-RS500 Press-Fit BB86 is primarily designed for bikes fitted with a road frame or a platform that uses the standard BB86 and a pedal set Shimano Hollowtech II 24 mm compatible.
It can therefore be used for the maintenance or repair of many road bikes, as well as other bikes that use this combination of standards.
Compatibility must always be checked against the frame standard and the crankset standard.
Bottom bracket shell Shimano BB-RS500
Editing Press-Fit BB86
Compatible with cranksets Shimano Hollowtech II
Bottom bracket of 24 mm
BB86 bottom bracket width: 86.5 mm
A solution designed to replace a worn-out casing
Design Shimano
Suitable for bikes fitted with a compatible Press-Fit frame
Reference EBBRS500PB
| Feature | Details |
|---|---|
| Brand | Shimano |
| Model | BB-RS500 |
| Reference | EBBRS500PB |
| Type | Press-Fit bottom bracket shell |
| Standard frame | BB86 |
| Box width | 86.5 mm |
| Pedal interface | Hollowtech II |
| Axle diameter | 24 mm |
| Usage | Road / BB86-compatible bike |
| Editing | Press-Fit |
| Function | Replacement / maintenance |
| Bottom bracket | Pressfit BB86-BB92 41x86-92 |
|---|---|
| Crankset compatibility | Shimano and Rotor 24 mm axle |
| Bearings | steel |
| EAN | 4524667925682 |
| Supplier reference | EBBRS500PB |
Average rating: 5 out of 5
Based on 1 review
Show attestation (opens in a new window)
Very good value for money!
No review matches this rating.
1 review shown out of 1
It is compatible with frames to the PressFit BB86 standard (diameter 41 mm, width 86.5 mm).
It is primarily designed for Shimano road cranksets with a 24 mm axle (Hollowtech II).
PressFit fits directly into the frame without any threading, offering a weight saving and often greater stiffness.
Yes, a bottom bracket press is recommended to ensure accurate fitting without causing damage
It depends on usage and conditions, but Shimano bearings are renowned for their durability.
The BB86 standard refers specifically to a bottom bracket with a width of 86.5 mm and Press-Fit cups. The part number of the frame or bottom bracket currently fitted can be used to confirm the standard.
The BB86 uses press-fit cups in the frame, whilst the BSA is a threaded standard in which the bottom bracket is screwed into the bottom bracket shell.
The frame must be BB86-compatible and the crankset must use the 24 mm axle corresponding to the bottom bracket. You must also take into account the type of crankset and the chainline.
Any noticeable play in the crankset, creaking noises, stiff spots or uneven rotation may indicate worn bearings or an assembly issue.
Generally speaking, yes, but fitting depends on the recommendations at Shimano and the type of frame. The contact surfaces must be clean, and the fitting method must comply with the frame and bottom bracket manufacturer’s guidelines.
For road bikes, the BB86 standard corresponds to a bottom bracket width of 86.5 mm.
Our team suggests
You may also like
Other products
To discover