Compatible with 34-tooth sprockets
Road specialist
The pebbles from derailleur rear Shimano Dura-Ace RD-R9250 Di2, reference Y3GK98010, are some coins from replacement original designed for the derailleur Electronics Shimano Dura-Ace RD-R9250 To 12 speeds. This game includes a pebble from guidance higher and a pebble from voltage lower, intended To maintain a progress precise from the chain.
Equipped from bearings Waterproof from for the sake of clarity, these pebbles contribute To limit the friction and To preserve the fluidity from the transmission. They constitute one solution suitable To the interview of a bike from road top from range Equipped from the group Shimano Dura-Ace Di2 R9200.
The game of pebbles Shimano Y3GK98010 is specifically designed for the RD-R9250 rear derailleur from the Dura-Ace Di2 range. These components play a vital role in the operation of the drivetrain by guiding the chain between the various sprockets on the cassette and maintaining its tension.
Replacing them restores normal operation when the original rollers show signs of wear, abnormal play or reduced smoothness of rotation. Choosing a part Shimano The original part ensures compatibility with the intended derailleur.
Both rollers are fitted with sealed precision bearings. This design ensures smooth rotation whilst minimising friction in the drive train.
On a high-performance road bike, chainrings in good condition help to ensure the chain runs smoothly and that gear changes are consistent. They also contribute to the quiet operation of the drivetrain when the whole system is clean, properly lubricated and well adjusted.
Part number Y3GK98010 refers to the set of pulleys for the rear derailleur Shimano Dura-Ace RD-R9250 12-speed Di2. It is important to ensure compatibility: the pulleys are not universal and part numbers may vary from one derailleur model to another.
During assembly, you must identify the guide roller and the tension roller, ensure they are positioned correctly and follow the assembly instructions Shimano. Incorrect reassembly may disrupt the chain’s movement and affect the quality of gear changes.
| Feature | Description |
|---|---|
| Brand | Shimano |
| Range | Dura-Ace |
| Manufacturer’s reference | Y3GK98010 |
| Compatible model | RD-R9250 |
| Transmission | Shimano Di2 12-speed |
| Product type | Rear derailleur pulley set |
| Number of pebbles | 2 |
| Contents of the set | 1 guide roller and 1 tension roller |
| Dentures | 11 teeth per roller |
| Bearings | Sealed precision bearings |
| Colour | Black |
| Usage | Road bike |
| EAN | 4550170229320 |
The pack contains a set of two rollers Shimano :
| Speed compatibility | 12v |
|---|---|
| EAN | 4550170229320 |
| Supplier reference | Y3GK98010 |
Average rating: 5 out of 5
Based on 2 reviews
Show attestation (opens in a new window)
Very good
In line with my expectations
No review matches this rating.
2 reviews shown out of 2
No, they are specifically designed for the Dura-Ace RD-R9250 12-speed derailleur.
They feature high-precision sealed bearings, which reduce friction and improve smoothness.
When they are worn, noisy or when gear changes become less precise.
No, replacing them is straightforward using basic tools, provided you ensure the rollers are facing the correct way (guide and tension).
Heavily worn or misshapen teeth, uneven rotation, excessive play or unusual noises may indicate that replacement is necessary. Regular checks help to prevent deterioration of the chain guide.
It is generally recommended to replace the entire set when both pulleys show similar levels of wear. If only one pulley is damaged, you should nevertheless check the condition of the other one before deciding on the necessary action.
How often you clean your bike depends on how you use it. Cleaning is particularly important after rides in the rain or on dirty roads. Remove grease and dirt without using harsh chemicals that could damage the bearing seals.
The bearings are sealed. Avoid dismantling the pulleys or applying unsuitable lubricant to the bearings. For routine maintenance, clean the external surfaces and lubricate the chain with a suitable product.
Replacing the pulleys does not usually require any electronic reconfiguration of the Di2 system. However, you must follow the fitting instructions and check the chain path and the derailleur’s operation after carrying out the work.
Our team suggests
You may also like
Other products
To discover