Compatible with all speeds from 8 to 11v
More practical, no whip
Have you broken your chain whip again? Or simply broken a link in the chain you use to hold the cassette? Forget all that and opt for this whip-free tool.
A former racer with a keen eye for equipment
The PRO PRTL0149 bike cassette removal tool kit is a comprehensive set designed to make it easier to remove and fit bike cassettes at home or in a workshop. Combining a PRO cassette spanner and a lockring tool, this kit allows you to work efficiently on modern drivetrains without the need for a separate chain whip.
Compatible with 11- and 12-speed drivetrains, as well as cassettes fitted with a smaller 10- or 11-tooth sprocket, the PRTL0149 is a particularly useful tool for servicing road bikes, mountain bikes and gravel bikes fitted with compatible cassettes.
Made from hardened steel, the tools feature long handles that provide greater leverage. The ergonomic grips also make them easier to hold when the clamping ring is tightly secured.
The PRO PRTL0149 includes the two tools required for the job:
This combination allows you to hold the cassette in place whilst loosening the lockring. It also enables you to carry out the reverse operation when refitting a cassette.
The advantage of this design is that it provides a ready-to-use set for the workshop. The long handles provide greater leverage than smaller, compact tools, making it easier to loosen lock rings that are sometimes very tight.
The PRO PRTL0149 kit is designed for 11- and 12-speed drivetrains and cassettes where the smallest sprocket has 10 or 11 teeth.
This compatibility covers many modern drivetrains used on road bikes, mountain bikes and gravel bikes.
Please note: the number of speeds is not the only criterion for compatibility. You must also check the standard of the cassette and the clamping ring. In particular, the PRTL0149 is not intended for removing conventional freewheel systems that do not have a removable cassette of this type.
One of the advantages of the PRO PRTL0149 is its design, which allows for removal without the need for a traditional chain whip. The cassette spanner is designed to hold the sprockets in place during the operation, whilst the lockring tool acts on the lockring.
This design greatly simplifies home maintenance and eliminates the need to purchase and store several separate tools. PRO specifically markets this kit as a solution designed to enhance the capabilities of a home bike workshop.
The tools in the kit are made from hardened steel, a material suited to the considerable force required to loosen a cassette ring.
The long handles are another key feature. They provide greater leverage, making it easier to apply the force required to loosen the cassette.
The ergonomic handles, meanwhile, improve comfort and control of the tool, particularly when the task requires significant effort.
Removing the cassette may be necessary in various situations:
With the PRTL0149, these tasks can be carried out more easily in a home workshop, without always having to call in a bike mechanic.
The PRTL0149 is particularly recommended for:
To remove a cassette:
To reassemble, carry out the steps in reverse order. It is important to adhere to the tightening torque recommended by the cassette manufacturer when reassembling.
The PRO PRTL0149 complete cassette removal kit is an excellent tool for routine maintenance of modern drivetrains. With its cassette spanner and hardened steel lockring tool, long shafts and ergonomic handles, it makes it easier to fit and remove a cassette.
Its main advantage: a comprehensive and robust kit that allows you to work without a separate chain whip.
Please note: the PRTL0149 is officially designed for 11- and 12-speed drivetrains, with cassettes featuring a small sprocket with 10 or 11 teeth. Always check your cassette’s standard before use.
| Colours | black |
|---|---|
| Speed compatibility | 11-12v |
| EAN | 8717009459822 |
| Supplier reference | PRTL0149 |
Average rating: 5 out of 5
Based on 66 reviews
Show attestation (opens in a new window)
A very interesting innovation. Makes cassette installation and removal easier.
Not used yet
good product
Very good item, sturdy and very practical, without damaging important parts.
Very good
Not tried yet
Perfect.
Not used yet
good
Perfect in this range
No review matches this rating.
10 reviews shown out of 66
The PRTL0149 is a bicycle cassette tool kit comprising a cassette spanner and a lockring tool. It is used to remove and refit a cassette on the rear wheel.
Used for:
Removing the cassette (the set of sprockets) for maintenance or replacement.
Fitting/re-screwing the cassette after cleaning or replacement.
Compatible with:
✔ 11-speed and 12-speed drivetrains.
✔ cassettes with a smallest sprocket of 10T or 11T.
The main standards Shimano and SRAM are generally accepted.
This kit includes:
A cassette wrench (main tool).
A lockring tool.
Both tools have long, ergonomic handles for a better grip and greater leverage.
They are made from hardened steel, which is robust and designed to withstand the forces required to unscrew the cassette mechanism.
No, the kit is sufficient for a complete dismantling and reassembly.
Remove the rear wheel from your bike.
Place the ring spanner on the cassette lockring.
Insert the cassette spanner into the ring tool.
Whilst holding the cassette in place, turn anti-clockwise to unscrew it.
Remove the cassette once the ring has been loosened. (General procedure — adjust according to your bike model.)
It is designed for most 11/12-speed cassettes Shimano and SRAM, but is not compatible with freewheels or older non-cassette standards. Always check that the lockring profile matches the tool.
The PRTL0149 is used to remove and fit a bike cassette. It comprises a cassette spanner and a tool for the lockring.
Yes. The manufacturer explicitly states that it is compatible with 11-speed drivetrains.
Yes. The PRTL0149 is also designed for 12-speed drivetrains.
Yes. ‘PRO’ indicates compatibility with cassettes where the smallest sprocket has 10 or 11 teeth.
No. The PRTL0149 is specifically designed as a solution that does not require a separate chain whip. It includes the PRO cassette spanner and the lockring tool.
It includes:
Yes. The ‘PRO’ designation indicates that the product is made from hardened steel, suitable for the considerable force required to remove cassettes.
Yes. Both tools have long handles designed to improve leverage and make it easier to loosen the cassette ring.
Yes, provided the mountain bike is fitted with an 11- or 12-speed compatible cassette that meets the tool’s specifications. The kit is also suitable for road and gravel bikes.
Yes. The kit is designed for removing and fitting cassettes. When fitting, however, you must ensure you use the torque specified by the cassette manufacturer.
Our team suggests
You may also like
Other products
To discover