- €20.00 economy
A comprehensive bike GPS with colour display, extended battery life and advanced training features. Perfect for cyclists who are passionate about data, navigation and performance.
Technology specialist
The Rider 650 E Bryton redefines the cycling GPS experience with its 2.8-inch colour touchscreen, 33-hour battery life and advanced features. Equipped with Climb Challenge, it provides a detailed graphical view of climbs, showing distance, gradient and elevation gain. It also features an ambient light sensor, a customisable quick status menu, and turn-by-turn navigation with OSM maps.
The configurable function button, radar compatibility, e-bike features, indoor trainer support and advanced power statistics make this cycle computer the perfect companion for discerning cyclists, whether on the road or on mountain bikes.
Connected, smart, durable and accurate, the Rider 650 E is the ideal choice for enthusiasts of performance and technology.
- Dimensions: 84.5 x 56.8 x 16 mm
- Weight: 92 g
- 2.8" TFT colour touchscreen
- Climb Challenge
- Navigation with OSM maps
- Customisable function button
- Compatibility with e-bikes, ANT+ speed sensors and power meters
- Live Track, Group Ride & Chat
- Ambient light sensor
- Advanced training + home trainer support
- Display resolution: Capacitive TFT (optimal resolution)
- Operating temperature: -10°C to 50°C
- Water resistance rating: IPX7
- USB port: USB-C
- Display type: Capacitive colour touchscreen
- Battery life: up to 33 hours
- Storage: Sufficient internal memory for maps and activities
- Rider 650 bike computer
- USB-C cable
- Standard bike mount
- Quick start guide
- Product code: Rider 650E
- Brand: Bryton
| Manufacturer weight | 92 g |
|---|---|
| Device dimensions | 84.5 x 56.8 x 16 mm |
| Screen size | 2.8 inches |
| Screen type | An LCD / TFT colour screen is a liquid crystal display lit from behind, like a smartphone screen. It offers vivid colours, good contrast and a detailed map, which makes navigation pleasant. On the other hand, the backlight uses more energy and readability in bright sunlight depends on the brightness setting, at the expense of battery life. |
| Touchscreen | Yes |
| Colour screen | Yes |
| Map navigation | The bike computer has built-in maps displayed on screen, with roads, tracks and points of interest. It can calculate a route directly on the device and recalculate it if you leave the course. It is the right choice for exploring new areas on the road, on a gravel bike, on a mountain bike or on tour, and for bikepacking. |
| Sensor connectivity | ANT+ and Bluetooth connectivity means the bike computer communicates with sensors using cycling's two standard wireless protocols. It therefore works with almost all speed, cadence, heart rate and power sensors, as well as smart trainers and radars. It is the most open choice if you already own sensors or plan to add some. |
| Measured functions | Altitude / Cadence is the number of pedal revolutions per minute, expressed in rpm. It helps you pedal efficiently, choose the right gear and structure training sessions, on the road or on a turbo trainer. Displaying it requires a cadence sensor, or a power meter that sends it to the bike computer. HR, or heart rate, is the number of heartbeats per minute, expressed in bpm. It lets you measure the intensity of your effort, ride in the right training zone and track your recovery. Displaying it on the bike computer requires a heart rate chest strap or a compatible optical sensor, connected via ANT+ or Bluetooth. FTP (Functional Threshold Power) is the maximum power a cyclist can theoretically sustain for about one hour, expressed in watts. It serves as a reference for setting power zones and calibrating training sessions. The bike computer estimates it from your rides or a test, which requires a power meter and often a heart rate strap. Power is the work you put into the pedals at any given moment, calculated from torque and rotational speed, and expressed in watts. It is a direct measure of effort that does not depend on wind, gradient or cardiac fatigue. Displaying it requires a power meter fitted in the pedals, crankset or hub, or a connected smart trainer. |
| Battery life | 33 h |
| Charging type | USB-C rechargeable |
| Di2 / eTap / AXS compatible | A Di2 / eTap / AXS compatible bike computer connects to Shimano Di2 and SRAM eTap or AXS electronic groupsets. It displays the gear selected and the groupset battery level and, depending on the model, lets you scroll through pages using the handlebar controls. Check this criterion if your bike has, or will have, electronic shifting. |
| Indoor trainer compatible (FE-C) | A turbo trainer (FE-C) compatible bike computer supports the ANT+ FE-C protocol, which allows it to control the resistance of a smart trainer. It can set a target power during a structured session or reproduce the gradient of a recorded route. You can therefore train indoors without a computer or tablet, using the same device as on the road. |
| Rear radar compatible | A rear radar compatible bike computer connects to a radar mounted on the back of the bike and displays vehicles approaching from behind. A visual and audible alert warns you of their arrival, so you can anticipate being overtaken. It is a popular safety device on the road, on busy routes as well as on narrow lanes with poor visibility. |
| Water resistance | The IPX7 rating means the bike computer withstands immersion up to 1 metre for 30 minutes, with the X indicating that dust protection has not been tested. It copes with rain, water spray and mud. For road riding and most gravel or mountain bike rides, this level of protection is sufficient. |
| Barometric altimeter | A barometric altimeter measures altitude from changes in atmospheric pressure, rather than deriving it from the GPS signal alone. The recorded elevation gain is more accurate and consistent, without the altitude jumps that are common with GPS. It is an asset for cyclists who ride in the mountains or on hilly routes and keep a close eye on their climbing. |
| GPS | A multi-band (dual-frequency) GPS receives two frequencies transmitted by each satellite, as well as combining several constellations. It is better at correcting errors caused by the signal bouncing off buildings, rock faces and foliage. The track is more accurate in towns, in forests and in narrow valleys, a clear advantage for mountain biking and gravel riding. |
| Temperature | Yes |
| Audible alerts | Yes |
| Number of data screens | Up to 10 |
| Customisable screens | Yes |
| Bell | No |
| Auto-pause | Yes |
| Route import | Yes |
| Unread messages | Yes |
| Strava Live compatible | No |
| Climb detection | A bike computer with climb detection automatically identifies the climbs on a loaded route and alerts you as you approach them. During the climb, it displays the remaining distance, elevation gain and gradient, so you can pace your effort to the summit. This feature is valuable in the mountains, on the road or on gravel, and for sportives with a demanding profile. |
| Back to start | No |
| Elevation profile | Yes |
| Call and text notifications | Yes |
| Lanyard included | Yes |
| Colours | black |
| EAN | 4718251593641 |
| Supplier reference | BRYTON.R650.E |
Average rating: 4.5 out of 5
Based on 4 reviews
Show attestation (opens in a new window)
Good
Good product, not very expensive, a lot of possibilities.
Good investment
Good material and especially quite easy to use
No review matches this rating.
4 reviews shown out of 4
The Rider 650 E Bryton is a GPS cycle computer featuring a 2.8-inch colour touchscreen, an exceptional battery life of 33 hours, turn-by-turn navigation using pre-loaded OSM maps, and a host of modern features (Climb Challenge, Quick-Status Menu, Live Track).
The “E” version includes the unit only ( Bryton mount, USB-C cable, safety strap), without sensors (heart rate, speed, cadence). Ideal for those who already have their own ANT+/Bluetooth sensors.
Up to 33 hours of continuous GPS use (tested in real-world conditions). Fast charging via USB-C (possible whilst cycling). Perfect for long rides and bikepacking adventures, allowing you to go on back-to-back rides without needing to recharge.
Pre-loaded regional OSM maps (free worldwide download via the app). Turn-by-turn navigation with street names, POIs, mountain passes, distance and direction. Rerouting (via the app Bryton s enabled for recalculation). Features: return to start, retrace (reverse route), explore, multi-type maps (road/gravel/MTB), POI/address search. Intersection Snapshot for visual cues at junctions.
Exclusive ‘ Bryton ’ feature: graphical preview of imported road climbs (colour-coded gradient, distance remaining, slope profile, altitude, ascent). Displays colour-coded segments to motivate you during the climb. Very useful for climbers and off-the-beaten-track explorations.
Yes! The rear mount is replaceable. With the V2 conversion kit Bryton Rider Serie S (sold separately), you can switch to the quarter-turn system Garmin. You can reuse your out-front mounts, stem, etc. (K-Edge, etc.).
ANT+: Heart rate, speed, cadence, power, rear radar (Gardia/Bike Radar up to 150m with colour/audio alerts), smart lights, e-shifting (Di2, eTap, EPS, K-Force WE), FE-C smart trainer, e-bikes (Shimano Steps + ANT+ LEV for assist level, battery, etc.). Bluetooth: HR (watches), Bryton Active app, auto-upload.
Yes, it is IPX7-certified: it can withstand accidental exposure to water up to 1 metre deep for 30 minutes. Perfect for use in the rain, against splashes and when washing your bike. Avoid prolonged immersion.
Via the Active Bryton app (iOS/Android): Auto-sync to Strava, TrainingPeaks, Komoot, Relive and Ride with GPS. Import routes (Komoot, Strava, Ride with GPS). Create/import training sessions (TrainingPeaks). Live Track, Group Ride & Chat (invitations, pre-set messages), smartphone notifications.
Yes: ANT+ FE-C compatible for smart trainer control (gradient simulation, resistance adjustment). Import routes for Virtual Ride. Ideal for structured workouts, resilience training and skip intervals.
Our team suggests
You may also like
Other products
To discover