Dogears repair plate for Garmin cycle computers

This plate acts as a second mounting bracket for your Garmin bike computer. If a mounting tab breaks, you can no longer use your bike computer. Dogears offers this quick and inexpensive solution. You simply need to file down the remaining notch to create a flat, rounded surface.

You can then position the Dogears on the bike computer (make sure it’s the right way round so the display is facing the correct direction). A test fit may be necessary if you are unsure. A little glue to hold the assembly in place using the two screws, and your Garmin bike computer is ready to use again. Simple, quick and effective!

Technical specifications:

- Repair bracket for Garmin bike computer
- Replaces the original mounting bracket
- Aluminium
- Supplied with two screws
- Repair time: 5 minutes
- Compatible with 500-800-1000-Explore-130 series
- Brand: Dogears

The Velotech tutorial for fitting your Dogears mount is available at velotech.fr: How to repair the Garmin bike computer mount with Dogears.

FAQ

1. What is a Garmin Dogears speedometer repair plate used for?

This is an aluminium part that replaces or reinforces the small plastic fixings on a Garmin bike computer that have broken or become too worn, so that the device can once again be securely attached to its bike mount.

2. Why do original Garmin mounts break?

The plastic tabs used to secure the device to the mount are fragile and may crack or wear out over time, particularly if the device is frequently removed.

3. What is the Dogears plaque made of?

It is made of aluminium, which is more robust than the original plastic, ensuring a durable repair.

4. How do you fit a Dogears repair patch?

Position the Dogears repair plate on the back of the meter, carry out any necessary preparation (sanding/cleaning), then secure it with the screws provided and, if necessary, a little glue to ensure proper alignment and a secure fit.

5. Is it compatible with all Garmin Edge models?

These plates are designed for Garmin Edge models with standard “quarter-turn” mounts, such as the 500, 800, 1000, Explore or 130 series.

7. Is this repair sturdy?

Many users find the aluminium plate more robust than the original plastic tabs, but careful installation is important for durability.

8. Should I use glue as well as screws?

Some tutorials recommend adding glue (e.g. superglue) to hold the plate firmly in place before screwing, but this isn’t always necessary if the screws hold securely.