- €42.00 economy
The Wahoo Fitness Elemnt Roam V3 is much more than just a GPS bike computer. With its touchscreen and state-of-the-art features, it will become your favourite companion for all your long adventures.
Technology specialist
Designed to simplify and optimise your cycling rides, the Wahoo Fitness Elemnt Roam V3 will always be ready for adventure, whether exploring new routes or taking on challenges. Powerful and robust, the third version of the Elemnt Roam features a large, high-resolution colour touchscreen.
Thanks to precise and easy-to-read mapping, you’ll be able to follow a route effortlessly via intuitive navigation. With smart features that manage all the details of your rides, this Wahoo Fitness Elemnt Roam V3 will help you stay focused on the road. Offering a battery life of 25 hours, this GPS bike computer will also help you manage all your training sessions effectively to make progress, thanks to a host of features.
- 2.8" / 7.1 cm high-resolution colour screen - 16 m
- Touchscreen
- Audio speaker
- Battery life: 25 hours
- Dimensions: Height 96 mm, Width 53 mm, Depth 24 mm
- Weight: 109 grams
| Manufacturer weight | 109 g |
|---|---|
| Device dimensions | 96 x 53 x 24 mm |
| Screen size | 2.8 inches |
| Screen type | An LCD / TFT colour screen is a liquid crystal display lit from behind, like a smartphone screen. It offers vivid colours, good contrast and a detailed map, which makes navigation pleasant. On the other hand, the backlight uses more energy and readability in bright sunlight depends on the brightness setting, at the expense of battery life. |
| Touchscreen | Yes |
| Colour screen | Yes |
| Map navigation | The bike computer has built-in maps displayed on screen, with roads, tracks and points of interest. It can calculate a route directly on the device and recalculate it if you leave the course. It is the right choice for exploring new areas on the road, on a gravel bike, on a mountain bike or on tour, and for bikepacking. |
| Sensor connectivity | ANT+ and Bluetooth connectivity means the bike computer communicates with sensors using cycling's two standard wireless protocols. It therefore works with almost all speed, cadence, heart rate and power sensors, as well as smart trainers and radars. It is the most open choice if you already own sensors or plan to add some. |
| Measured functions | Altitude / Cadence is the number of pedal revolutions per minute, expressed in rpm. It helps you pedal efficiently, choose the right gear and structure training sessions, on the road or on a turbo trainer. Displaying it requires a cadence sensor, or a power meter that sends it to the bike computer. HR, or heart rate, is the number of heartbeats per minute, expressed in bpm. It lets you measure the intensity of your effort, ride in the right training zone and track your recovery. Displaying it on the bike computer requires a heart rate chest strap or a compatible optical sensor, connected via ANT+ or Bluetooth. Power is the work you put into the pedals at any given moment, calculated from torque and rotational speed, and expressed in watts. It is a direct measure of effort that does not depend on wind, gradient or cardiac fatigue. Displaying it requires a power meter fitted in the pedals, crankset or hub, or a connected smart trainer. |
| Battery life | 25 h |
| Charging type | USB-C rechargeable |
| Di2 / eTap / AXS compatible | A Di2 / eTap / AXS compatible bike computer connects to Shimano Di2 and SRAM eTap or AXS electronic groupsets. It displays the gear selected and the groupset battery level and, depending on the model, lets you scroll through pages using the handlebar controls. Check this criterion if your bike has, or will have, electronic shifting. |
| Indoor trainer compatible (FE-C) | A turbo trainer (FE-C) compatible bike computer supports the ANT+ FE-C protocol, which allows it to control the resistance of a smart trainer. It can set a target power during a structured session or reproduce the gradient of a recorded route. You can therefore train indoors without a computer or tablet, using the same device as on the road. |
| Rear radar compatible | A rear radar compatible bike computer connects to a radar mounted on the back of the bike and displays vehicles approaching from behind. A visual and audible alert warns you of their arrival, so you can anticipate being overtaken. It is a popular safety device on the road, on busy routes as well as on narrow lanes with poor visibility. |
| Water resistance | The IPX7 rating means the bike computer withstands immersion up to 1 metre for 30 minutes, with the X indicating that dust protection has not been tested. It copes with rain, water spray and mud. For road riding and most gravel or mountain bike rides, this level of protection is sufficient. |
| Barometric altimeter | A barometric altimeter measures altitude from changes in atmospheric pressure, rather than deriving it from the GPS signal alone. The recorded elevation gain is more accurate and consistent, without the altitude jumps that are common with GPS. It is an asset for cyclists who ride in the mountains or on hilly routes and keep a close eye on their climbing. |
| GPS | A multi-band (dual-frequency) GPS receives two frequencies transmitted by each satellite, as well as combining several constellations. It is better at correcting errors caused by the signal bouncing off buildings, rock faces and foliage. The track is more accurate in towns, in forests and in narrow valleys, a clear advantage for mountain biking and gravel riding. |
| Temperature | Yes |
| Audible alerts | Yes |
| Number of data screens | Unlimited |
| Customisable screens | Yes |
| Bell | No |
| Auto-pause | Yes |
| Route import | Yes |
| Unread messages | Yes |
| Strava Live compatible | A Strava Live compatible bike computer displays Strava segments live during your ride. As you approach a starred segment, it signals the start, then compares your progress in real time with your personal record or that of other riders. This feature requires a Strava account with a subscription and appeals to cyclists who enjoy racing against their own times. |
| Climb detection | A bike computer with climb detection automatically identifies the climbs on a loaded route and alerts you as you approach them. During the climb, it displays the remaining distance, elevation gain and gradient, so you can pace your effort to the summit. This feature is valuable in the mountains, on the road or on gravel, and for sportives with a demanding profile. |
| Back to start | Yes |
| Elevation profile | Yes |
| Call and text notifications | Yes |
| Lanyard included | No |
| Colours | black |
| EAN | 0850048106536 |
| Supplier reference | WAWFCC8 |
Average rating: 5 out of 5
Based on 2 reviews
Show attestation (opens in a new window)
Very good product, following on from a Bolt V1 and V2... still satisfied with Wahoo
I purchased my first Wahoo Roam 3, but unfortunately it was defective. I returned it at my own expense, and customer service contacted me right away to find out more. After checking it, they sent me a new unit and refunded the shipping cost. Thanks to the team (Nicolas).
No review matches this rating.
2 reviews shown out of 2
Our team suggests
You may also like
Other products
To discover