Supplied with quick-release fastener
Shimano's best 12-speed chain
Road specialist
The Shimano CN-M9100 is a high-end 12-speed chain developed for Shimano XTR and Dura-Ace drivetrains. Part number ICNM9100126Q refers to a version of 126 maillons, supplied with a Quick Link to facilitate fitting and maintenance of the drivetrain.
Designed to complement modern 12-speed Shimano drivetrains, this chain combines precise gear changes, low friction, quiet operation and excellent durability. In particular, it features SIL-TEC technology, which helps to reduce friction and improve the smoothness of the drivetrain.
With its 126 maillons length, it is suitable for a wide range of set-ups, including those using wide-range MTB cassettes or 12-speed road drivetrains. However, the length must be adjusted to fit the bike before fitting.
The CN-M9100 has been designed to complement the Shimano 12-speed drivetrains. Its directional design optimises performance with HYPERGLIDE+ technology, particularly when shifting under load.
On mountain bikes, this technology enables particularly fast and smooth gear changes, even when the rider continues to apply significant pressure to the pedals.
The chain is also designed to work effectively with compatible Shimano 12-speed cassettes, helping to maintain precise engagement between the sprocket teeth and the chain links.
Shimano SIL-TEC treatment is used on the CN-M9100 to reduce friction between the chain’s various components.
In particular, this technology helps to:
To fully benefit from these properties, regular cleaning and lubrication remain essential.
The ICNM9100126Q version is available in 126 maillons. This generous length is particularly useful for high-capacity drivetrains, notably certain 1x12 MTB set-ups.
Please note, however, th126 maillons does not mean the chain must be fitted in its entirety.
The final length must be determined based on:
A chain that is too long or too short can disrupt the drivetrain’s operation and accelerate wear on certain components.
Part number ICNM9100126Q is supplied with a Quick Link Shimano compatible with this chain.
The Quick Link allows the chain to be closed without using a conventional connecting rivet. This is particularly convenient when replacing the chain or carrying out maintenance.
The Quick Link Shimano is designed for single-use only. Once removed, it is recommended that you replace it with a new quick link rather than reusing the old one.
The CN-M9100 is particularly suited to the Shimano XTR 12-speed MTB, but it also forms part of the high-end Shimano 12-speed ecosystem.
It is particularly well-suited to drivetrains using:
Compatibility must be checked against the complete drivetrain, including the cassette, crankset and derailleur.
| Brand compatibility | Shimano |
|---|---|
| Speed compatibility | 12v |
| EAN | 4550170323134 |
| Supplier reference | ICNM9100126Q |
Average rating: 5 out of 5
Based on 82 reviews
Show attestation (opens in a new window)
Quality and reliability confirmed with this chain.
Nothing
Not installed yet
very good
Always impeccable
I have been riding for years with this chain always satisfied
Perfect
Ras
Never disappointed by Shimano XTR/DA chains
Replacement same chain that has done 6000 km. Always well maintained it lasts longer
No review matches this rating.
10 reviews shown out of 82
Yes. The CN-M9100 is used on both the Shimano XTR 12-speed groupsets and on certain high-end Dura-Ace 12-speed road drivetrains.
Yes, the chain comes with a quick link Shimano SM-CN910-12 Quick Link.
Shimano We recommend replacing the Quick Link after dismantling to ensure optimum safety and reliability.
Yes. It has a specific direction of fit. The markings ‘ Shimano ’ must be visible on the outside of the chain.
The SIL-TEC treatment reduces friction, improves pedalling smoothness, minimises wear and helps to extend the life of the drivetrain.
The CN-M9100Shimano is a 12-speed chain, designed for compatible 12-speed Shimano drivetrains.
This version features 126 maillons.
Yes, this item comes with a Quick Link Shimano to join the chain.
It is recommended that you do not reuse a Quick Link Shimano once it has been removed. Use a new Quick Link to ensure a reliable connection.
Yes, the CN-M9100 is a chain designed for Shimano XTR 12-speed drivetrains.
The CN-M9100 is part of the high-end 12-speed Shimano chain range and can be used in compatible Shimano set-ups. However, please check the exact part number of your drivetrain before fitting.
Yes. It must be fitted in the direction specified by Shimano in order to ensure the gear-changing system performs correctly.
HYPERGLIDE+ is a technology from Shimano designed to improve the speed and smoothness of gear changes on compatible 12-speed drivetrains, even when the chain is under heavy load.
SIL-TEC is a surface treatment Shimano designed to reduce friction. It helps to improve the chain’s smoothness and quiet operation.
Clean the chain regularly with a suitable product, dry it, then apply a bike chain lubricant appropriate for the conditions in which it is used. Avoid allowing dust, mud or contaminants to build up on the drivetrain.
Our team suggests
You may also like
Other products
To discover