Compatible with all Shimano and Sram calipers - Excellent durability
With the new Shimano Dura-Ace R55C4 brake pads, braking efficiency is guaranteed and
20 years' experience in the world of cycling
The set of 4 DURA-ACE R55C4 ‘ Shimano ’ brake pads, part number Y8L298062, comprises two pairs of pads designed for rim brake systems on aluminium rims.
Part of the DURA-ACE range, these Shimano brake pads offer an excellent balance between braking power, progressive response, control and durability. They are the ideal solution for replacing worn brake pads on a road bike fitted with rim brakes.
Part number Y8L298062 officially corresponds to a pack of 2 pairs, i.e. 4 brake pads in total. Shimano intends them for use with calipers compatible with aluminium rims.
The R55C4 compound has been developed to provide effective and progressive braking on aluminium rims.
Braking performance is particularly important on a road bike: the brake pad must allow the cyclist to precisely modulate the force applied to the lever whilst offering sufficient bite when the situation demands it.
The R55C4 is therefore a solution suited to both everyday cycling and more intensive sports use.
Please note: this product code is for aluminium rims.
Shimano clearly distinguishes the R55C4 brake pads intended for aluminium rims from those designed for carbon rims. The Shimano catalogue lists the Y8L298062 as an R55C4 version for aluminium rims and distinguishes it from the references dedicated to carbon.
If your bike has wheels with carbon rims, you must therefore choose the Shimano brake pads specifically designed for this material.
The R55C4 brake pads are designed to deliver braking that is both powerful and progressive.
This progressive response makes it easier to modulate braking and allows for better control of the bike in situations requiring significant deceleration.
Their design is also engineered to promote water drainage from the braking surface, which helps maintain performance in wet conditions.
The R55C4 brake pads are used on a wide range of road calipers— Shimano —fitted with compatible cartridges.
In particular, they can be used with several generations of DURA-ACE, Ultegra and 105 calipers, as well as certain Shimano calipers designed for cyclocross and other road applications. The compatibility lists published for this part number include, in particular, the BR-R9100, BR-R9000, BR-R8000, BR-R7000 and several previous generations.
They are also available for certain SRAM-compatible brake caliper systems.
However, it is recommended that you check the exact compatibility of your brake caliper before fitting.
With 4 brake pads – i.e. 2 pairs – part number Y8L298062 allows you to replace both the front and rear brake pads at the same time when your bike uses four identical pads.
This is a practical solution for carrying out a full brake service and ensuring both calipers have new brake pads.
Regular replacement of the brake pads is essential to maintain consistent braking power and prevent an excessively worn pad from damaging the braking surface of the rim.
Workshop tip: after fitting, carefully check the alignment of the brake pads in relation to the braking surface. The pad must be correctly positioned on the rim and must never come into contact with the tyre. You should also take the opportunity during replacement to check the condition and cleanliness of the braking surface.
The set of 4 Shimano DURA-ACE R55C4 Y8L298062 brake pads is a reliable solution for replacing the brake pads on a road bike fitted with compatible calipers and aluminium rims.
With their R55C4 rubber compound, they offer powerful, progressive and long-lasting braking, whilst allowing for good control of the bike. The pack of 4 pads allows you to replace both pairs on the bike in a single operation.
Please take care when selecting the correct part number: these brake pads are designed for aluminium rims and must not be used as a substitute for the models Shimano, which are specifically designed for carbon rims.
| EAN | 4524667995517 |
|---|
Average rating: 4.9 out of 5
Based on 131 reviews
Show attestation (opens in a new window)
Very good brake pads, excellent braking (aluminum rims). And you can still find them...
Nothing to report
-
Great!
Fast delivery
Meets the need
Nothing to complain about. Still not installed
very good braking
correct
Shimano quality always there, braking at the TOP. Mounted and used to date over 150 km.
No review matches this rating.
10 reviews shown out of 131
Item number Y8L298062 contains 4 brake pads, i.e. 2 pairs. Shimano lists the item officially as a ‘R55C4 (2 pairs)’ pack.
No. Part number Y8L298062 is for aluminium rims. Shimano sells R55C4 part numbers specifically for carbon rims.
Yes, they are compatible with many DURA-ACE brake calipers that use R55C4 brake pads/cartridges. Exact compatibility depends on the caliper model.
Yes, the R55C4 is used on several generations of Ultegra-compatible brake calipers, notably in the BR-6800 and BR-R8000 series.
Yes, the R55C4 tyre is compatible with several Shimano 105 cartridge-compatible calipers, including models such as the BR-5800 and BR-5700 series.
Yes, the R55C4 models are also listed as compatible with certain brake calipers SRAM. However, it is advisable to check the exact model of the brake caliper before purchasing.
Il faut les remplacer lorsque la gomme atteint sa limite d'usure, lorsque les rainures deviennent très peu visibles ou lorsque le freinage perd en efficacité.
It isn’t essential, but replacing both pairs at the same time ensures consistent braking performance at the front and rear.
New, correctly fitted brake pads ensure that the braking performance specified for the system is achieved. However, effectiveness also depends on the condition of the rim, the calipers, the cables or cable housings, and the brake adjustment.
The brake pad must be positioned correctly in the cartridge and aligned with the braking surface of the rim. After fitting, check that the caliper is centred and ensure that the brake pad never touches the tyre.
If you are unsure about fitting a braking component, it is best to have the bike checked by a professional.
No, you must use a Shimano part number specifically designed for carbon rims. The R55C4 Y8L298062 parts are intended for aluminium rims.
Our team suggests
You may also like
Other products
To discover