9 bar, Presta-Schrader or Dunlop valve, Dualhead 3.0 pump nozzle
Enables the use of a pump with a Schrader valve
Road specialist
The VARP45020 valve adapter allows you to temporarily convert a Presta valve into an interface compatible with a Schrader pump or nozzle, also known as a car valve. It is a small, particularly handy accessory for cyclists who want to be able to use different types of pumps, including a standard foot pump, a car tyre inflator or certain compressors.
Presta valves are very common on road bikes, gravel bikes and many modern mountain bikes. Schrader valves, on the other hand, use a format similar to that found on car tyres.
The VARP45020 adapter therefore allows you to screw an adapter onto the Presta valve to create a Schrader-style interface. This means you can use a pump that does not have a Presta nozzle.
This is particularly handy when travelling or on a ride when you don’t have your usual pump to hand.
Thanks to its compact size, this adapter fits easily into a saddle bag, handlebar bag or repair kit.
It’s particularly useful for emergency repairs: if your own pump is out of action or if you need to use a pump available at a workshop, garage or petrol station, the adapter allows you to inflate a tyre fitted with a Presta valve.
It’s very simple to use:
The threaded design allows for quick installation and a secure connection between the valve and the inflation nozzle. The product specification also states that it features a built-in seal designed to minimise air loss during inflation.
The VARP45020 Presta-to-Schrader valve adapter is a simple, compact and particularly practical accessory for cyclists. It allows a Schrader pump to be used on a Presta valve, particularly in the event of a puncture or when you do not have your usual pump to hand.
It allows you to inflate an inner tube or a tyre fitted with a Presta valve using a pump with a Schrader nozzle.
Yes, provided the pump or inflator uses a compatible Schrader nozzle. The adapter then provides the necessary interface for the Presta valve.
Yes, in theory, provided the inflator has a Schrader valve adapter suitable for tyres. However, you should exercise caution with car inflators: some deliver a high flow rate or pressure and may be harder to control than a bicycle pump.
Yes. Road bikes use Presta valves exclusively, and the adapter allows you to inflate them using a Schrader valve.
Yes, provided the mountain bike is fitted with a Presta valve. The size of the adapter depends not on the type of bike but on the type of valve.
Yes. It’s actually a useful item to keep in a repair kit, as it allows you to use a pump available on site even if it doesn’t have a Presta valve adapter.
Yes. It is designed to be screwed onto and unscrewed from the valve, allowing for repeated use.
It isn’t essential for occasional use, but removing it helps keep the adapter in good condition and allows the Presta valve to function normally again.
Our team suggests
You may also like
Other products
To discover