BBB AirPipe BFP-94 angled pump nozzle

very good (Translated review)

Product conforms to my needs. I will use it for inflating the lenticular wheel. (Translated review)

Top (Translated review)

Ideal for lenticular wheels (Translated review)

Practical (Translated review)

Ideal for inflating a lenticular wheel. (Translated review)

I bought this product to inflate a lenticular wheel. Top! (Translated review)

Essential for time trial wheels. (Translated review)

This angled tip allows me to inflate my solid wheel, but I had to modify it. The black thread you see in the photo corresponds to a Schrader valve thread. So if your pump can fit a Schrader valve, this tip is suitable for your pump, well that's the theory... Be careful if you have a Lezyne pump! Because even if the angled tip screws well onto the pump tip (ABS1 pro for me), air leaks at the pump/angled tip interface. The hole of the angled tip is too small and does not allow for a tight connection with the seal of the Lezyne pump. Indeed, in the Schrader tip of the Lezyne pump, there is a harder part wider than the hole of the angled tip which hinders good contact with the seal. In short, I had to take out the drill and a 4mm bit to slightly enlarge the hole of the angled tip, 2-3mm deep is sufficient. No leaks after this modification, so it works. I do not recommend this angled tip if you do not have a drill because you might have a bad surprise. (Translated review)

I didn't have the problem mentioned in the 3-star comment about needing to do some DIY. You always need to have two people to inflate a full wheel: one pumps, the other holds the pipe on the valve for sealing. But I've encountered that with all the pipes, including this one (Translated review)