Stabilises the bike during maintenance
Biodegradable – Gel formula – Carbon-compatible
Road specialist
Motorex ’s Bike Clean is a high-performance cleaner designed to remove mud, grease and oil residue that has built up after a ride in wet conditions or at the end of the season. Its gel-like consistency allows it to adhere perfectly to the bike’s surfaces and dissolve even dried-on grime, without the need for excessive scrubbing or the risk of scratching the frame.
Formulated with effective yet gentle active ingredients, this cleaner removes grease, oil and dirt without the need for harsh solvents. It is rapidly biodegradable, non-corrosive and VOC-free (volatile organic compounds). Tested on carbon, it protects seals, elastomers and braking performance, making it suitable for all types of bikes without restriction.
Supplied in a spray bottle with an adjustable spray nozzle, Bike Clean can be diluted with water depending on the level of soiling. It is ideal for thoroughly cleaning your road bike, gravel bike or mountain bike.
Instructions for use: First, thoroughly wet the bike with water. Set the spray nozzle to a fine mist to create a clinging foam on the surface. Apply MOTOREX BIKE CLEAN to all surfaces to be cleaned and leave to work for three to five minutes. Rinse the bike thoroughly with water once the cleaning time is up. Use a gentle, diffused water jet, keep a safe distance and do not direct the jet directly at the bearings, axles or head tube.
- Capacity: 1 litre
- Formula type: Biodegradable cleaning gel
- Material compatibility: Carbon, seals, elastomers, brakes
- Dilution: Dilutable with water
- Application: Spray bottle with adjustable spray pattern
- Solvent-free and VOC-free
- Non-corrosive, non-toxic
- Excellent cleaning power thanks to active ingredients
- Optimal effectiveness thanks to strong adhesion and deep-cleaning action
- Brand: Motorex
| Capacity | 1 litre |
|---|---|
| EAN | 7611197009559 |
| Supplier reference | MOT311485 |
Spray the product onto the bike, then leave it to work before rinsing with clean water.
The gel-like consistency of Motorex Bike Clean allows it to adhere to the bike’s surfaces, giving the active ingredients time to dissolve mud, grease and oil residues, including dried-on dirt. This formula reduces the need for excessive scrubbing.
It is important never to let the product dry on the bike: it must always be rinsed off whilst still wet. The use of a high-pressure washer is not recommended, nor is using the product in direct sunlight or on hot surfaces.
Yes, Bike Clean’ Motorex e has been tested on carbon with no adverse effects.
This cleaner’s gentle formula protects composite materials such as carbon, as well as the seals and elastomers found on a road bike. It also does not affect braking performance, ensuring safe use across the entire bike.
This broad compatibility means the product can be used on all types of bikes, whether they have carbon, aluminium or other types of frames, without any specific restrictions.
Yes, rinsing is essential and must be done before the product dries.
The manufacturer’s instructions clearly state that you must never allow Motorex Bike Clean to dry on the bike. The product must always be rinsed off with water whilst it is still wet to ensure the best possible result and prevent any residue from being left behind.
This rinsing must be carried out without a high-pressure washer, so as not to damage bearings, headsets or other components that are sensitive to pressurised water.
No, the manufacturer explicitly advises against this use.
Motorex ’s Bike Clean must not be used in direct sunlight or on hot surfaces, as this may affect the product’s effectiveness and how it reacts with the bike’s materials.
This precaution also applies to mopeds and motorbikes, which should never be cleaned immediately after use whilst they are still hot. It is therefore recommended that you wait until the bike has cooled down before cleaning it.
Yes, it is a rapidly biodegradable, VOC-free cleaner.
Motorex ’s Bike Clean is formulated without harsh solvents or volatile organic compounds, making it a non-toxic and non-corrosive product. Its rapid biodegradability allows for more responsible use during regular bike maintenance.
This eco-friendly formulation does not compromise on effectiveness: independent tests regularly confirm the product’s cleaning performance, which is comparable to that of more aggressive degreasers on the market.
It is recommended that you lubricate the chain and moving parts of the drivetrain immediately.
After rinsing off the Bike Clean Motorex, the manufacturer recommends applying a lubricant such as CHAINLUBE or CHAINWAX to the chain and the moving parts of the drivetrain (derailleurs, pulleys) to prevent corrosion.
This step is essential because cleaning removes not only dirt but also any lubricant residue from the chain, which must therefore be re-lubricated to maintain good drivetrain performance and minimise premature wear of the components.
Yes, Bike Clean Motorex can be diluted with water as required.
This feature allows you to adjust the product’s concentration depending on how dirty the bike is, offering flexibility of use whilst maintaining its cleaning effectiveness thanks to the active ingredients it contains.
The gel formula remains effective even when diluted, which optimises the product’s use over time whilst retaining its ability to adhere to the bike’s surfaces.
No, the manufacturer advises against using a high-pressure washer.
The instructions for use of the Motorex Bike Clean explicitly state that a high-pressure washer must not be used when rinsing. This recommendation is intended to protect sensitive bike components such as bearings, the headset or the bottom bracket, which can be damaged by excessive water pressure.
A standard rinse with water, carried out whilst the product is still wet, is sufficient to effectively remove the cleaner and any dissolved dirt.
Our team suggests
You may also like
Other products
To discover