BlackBearing MAX 688-2RS/E 8x16x5/6.5 mm full suspension MTB bearing, steel

The BlackBearing MAX range of bearings has been specifically developed for frame joints. They are suitable for oscillating movements such as those found on MTB frame pivots (link bearings, base bearings, seat stays, etc.), and have more balls than conventional bearings to support heavier loads. The 688-2RS/E reference will allow you to replace your bearings with dimensions of 8x16x5/6.5 mm.2RS seals are water and dust resistant, with a higher quantity of grease than standard bearings. Mechanical resistance is 30 to 40% higher than standard, allowing for a longer service life despite the high stresses exerted on this type of bearing.

- Steel balls
- Steel cage
- High-quality grease, in greater quantity than standard
- Low-friction 2RS seals: water and dust resistant
- Internal diameter: 8 mm
- External diameter: 16 mm
- Thickness: 5/6.5 mm (inner ring 5 mm, outer ring 6.5 mm)
- Reference: 688-2RS/E