Dual Control system - For Shimano 10-speed drivetrains
The Shimano Tiagra right-hand grip stands out for its remarkable reliability and promises smooth and efficient gear shifting.
Bruno V.
Road specialist
The Tiagra ST-4700 IST4700RI2 right-hand shifter ( Shimano ) is a brake and gear shifter designed for the Tiagra 10-speedShimano drivetrain for road bikes. It allows you to operate the rear derailleur from the handlebars and serves as a replacement part for the right-hand lever of a Tiagra 4700 groupset.
Designed in line with the ergonomic principles Shimano of STI shifters, this lever combines braking and gear-changing functions in a single unit, allowing you to keep your hands on the handlebars whilst changing gears.
Important: this part number refers to the right-hand shifter only. It is designed for use with a Tiagra 4700 Shimano 10-speed rear derailleur.
The ST-4700 is based on the STI ( Shimano) system, with braking and gear-changing functions integrated into the right-hand lever.
This design allows the cyclist to change gears without having to move their hands down to the bottom of the handlebars. The operation is particularly well-suited to road cycling, where changes in pace and gradient require frequent adjustments to the gear ratio.
The right-hand shifter is linked to the rear derailleur, whilst the left-hand shifter normally controls the front derailleur.
The Tiagra 4700 series is a 10-speed Shimano, with shifter ergonomics inspired by the higher-end Shimano groupsets.
The ST-4700 right-hand shifter is therefore designed for a drivetrain using the rear derailleur and cassette corresponding to this generation.
When replacing a component, it is recommended that you check the part number on your current shifter or groupset to avoid any incompatibility with a different Tiagra generation.
Not all 10-speed Shimano shifters are necessarily interchangeable.
The Tiagra 4700 uses a specific cable pull system. It is therefore preferable to replace an ST-4700 shifter with one compatible with the 4700 series, rather than simply choosing a Shimano shifter labelled ‘10-speed’.
The right-hand shifter can be replaced if it:
Replacing just the shifter allows the other components of the Tiagra groupset to be retained provided they are still in good condition.
On a traditional road bike Shimano, the right-hand shifter is linked to the rear derailleur.
It therefore allows you to select the different gears on the rear cassette. The number of available positions corresponds to a 10-speed drivetrain.
To ensure optimal performance after replacement, it is advisable to also check:
A new control cable will not be able to compensate for a heavily worn cable housing or a bent derailleur hanger.
Shimano ’s Tiagra ST-4700 10-speed right-hand lever (IST4700RI2 ) is a mechanical STI shifter designed for road bikes fitted with the Tiagra 4700 groupset. It controls both braking and rear gear changes, with an ergonomic design suited to road handlebars.
It is a particularly useful part for replacing a damaged or worn Tiagra 4700 right-hand shifter, whilst retaining the rest of the groupset.
| Features | Details |
|---|---|
| Brand | Shimano |
| Range | Tiagra |
| Series | 4700 |
| Part number | IST4700RI2 |
| Model | ST-4700 |
| Position | Right |
| Number of speeds | 10 |
| Function | Brake + gear change |
| Controlled derailleur | Rear |
| Technology | Mechanical STI |
| Bike type | Road |
| Set-up | Road handlebars |
| Use | Replacement / repair |
Frequently asked questions
La référence IST4700RI2 correspond à la commande droite Shimano Tiagra ST-4700, destinée aux transmissions 10 vitesses de la série 4700.
Il s'agit de la poignée droite. Elle commande normalement le dérailleur arrière.
Oui. Il s'agit d'une commande STI intégrant à la fois le levier de frein et les commandes de changement de vitesse.
La ST-4700 est conçue pour une transmission arrière 10 vitesses.
Elle est destinée aux transmissions compatibles avec le système d'indexation Tiagra 4700 10 vitesses. Il est important de vérifier la compatibilité de l'ensemble de la transmission plutôt que le seul nombre de pignons.
Oui. C'est justement l'un des intérêts de cette pièce détachée : elle permet de remplacer une commande droite défectueuse sans remplacer nécessairement la commande gauche.
Our team suggests
You may also like
We value your opinion
Based on 7 reviews
Materials received on time and correspond to my order, thank you for your competence (Translated review)
My bike was equipped with Dura Ace 10V with an 11-27 cassette. I replaced the cassette with a 14-30. I had to change the derailleur to a Tiagra medium cage and I also had to replace the right lever with a Tiagra lever because the Dura Ace 10V lever is not compatible with the Tiagra 10V derailleur! Now everything works perfectly. I have a left Dura Ace lever that I kept and a right Tiagra lever, the difference is barely noticeable. (Translated review)
- (Translated review)
Also works with a triple chainring 30-39-50 and 11-34 cassette (all in 4700) (Translated review)
In replacement of a 1995 Exage handle. This one seems more fragile to me. (Translated review)
I bought this handle to replace my ULTEGRA 6700 handle that broke. Completely compatible with the ULTEGRA 6700 10-speed rear derailleur. Very good quality, no difference in size or thickness. I am very satisfied with this handle. (Translated review)
Bought to replace my old right Ultegra 10-speed grip, it still does the job! (Translated review)
Other products
To discover