- -€4.00
- Black Friday
The benchmark product from Muc Off!
9-speed, 138 links, E-bike compatible
The Shimano CN-E6070 9-speed road bike, mountain bike and e-bike chain is an extended and reinforced 138-link version compatible with all 9-speed drivetrains on the market.
Rider Elite XC for 5 years
Expert tip: before ordering, check three essential points: 9-speed rear derailleur, single chainring at the front and drivetrain compatibility. For an e-bike fitted with a compatible Shimano STEPS 1x9 system, the CN-E6070-9 is a sensible choice.
Also remember to check the chain for wear regularly. A chain that is too worn can accelerate wear on the chainring and cassette and impair the quality of gear changes.
| Colours | silver |
|---|---|
| Brand compatibility | Shimano-Sram |
| Speed compatibility | 9v |
| EAN | 4524667669166 |
| Supplier reference | ICNE60709138I |
Average rating: 4 out of 5
Based on 3 reviews
Show attestation (opens in a new window)
Does the job perfectly, just a shame not to benefit from a quick release, more practical.
Rapid wear
Bought to replace a 2004 XT where the chainrings are out of stock. I also had to change the bottom bracket, all for 50€ and it's back on track. No chain skipping, it works perfectly (cassette and chain also changed)
No review matches this rating.
3 reviews shown out of 3
The CN-E6070-9 is a 9-speed HG-type chain.
This item, reference ICNE60709138I, is available with 138 links. Shimano also stocks the CN-E6070-9 in other lengths, including 118 and 126 maillons.
Yes. The CN-E6070-9 is a chain from the ‘E-Bike ’ range, designed for 9-speed e-bike drivetrains. It is engineered to withstand the additional stresses associated with electric-powered cycling.
Yes, provided the mountain bike uses a 1x9-speed compatible drivetrain. Shimano is the go-to choice, particularly with the STEPS E8000 9-speed system designed for mountain bikes.
It may be suitable for a compatible 9-speed drivetrain, but you must check the bike’s configuration carefully. This chain is primarily designed for E-Bike and single-chainring drivetrains. It should therefore not automatically be chosen for all 9-speed road drivetrains.
No, it is designed for a single-chainring configuration at the front (1x). Shimano explicitly states this restriction for the CN-E6070-9.
Compatibility must be checked against the complete drivetrain. Several retailers list it as compatible with 9-speed drivetrains Shimano and SRAM, but for an e-bike, it is best to check the compatibility of the entire system before fitting.
It depends on your bike. The 138 links correspond to the length supplied; the chain usually needs to be adjusted to the required length depending on the frame, chainring and cassette.
Our team suggests
You may also like
Other products
To discover