Shimano TL-BH62 brake hose cutting and fitting tool

Shimano TL-BH62 tool for cutting and preparing hydraulic brake hoses

The Shimano TL-BH62 is a professional tool designed to facilitate the cutting and preparation of hydraulic brake hoses Shimano. In particular, it enables a clean cut to be made to the hose and facilitates the fitting of the insert (ferrule/pin) required to connect the hose to the brake lever or caliper.

Essential when replacing, shortening or fitting a hydraulic hose, the TL-BH62 enables a more precise and cleaner job than with conventional tools.

Its design ensures the hose is held securely during cutting, resulting in a clean-cut end suitable for fitting the insert. The tool also features a system designed to facilitate the insertion of the connector into the hose.

Key features of the TL-BH62 Shimano

• Genuine Shimano tool for servicing hydraulic braking systems.
• Precise cutting of brake hoses to ensure a clean end.
• Holds the hose in place during the operation to improve precision.
• Makes it easier to insert the fitting into the hydraulic hose.
• Suitable for the maintenance and fitting of compatible Shimano hydraulic disc brakes.
• Saves time in the workshop when replacing or shortening hoses.
• Designed for maintenance work on Shimano systems.
• Manufacturer’s part number: TL-BH62.

What is the Shimano TL-BH62 used for?

The TL-BH62 is mainly used when work needs to be carried out on a hydraulic brake hose: fitting a new hose, replacing a damaged hose or shortening a hose that is too long.

When a hydraulic hose is cut, its end must be prepared correctly before it is connected. An uneven cut or incorrect fitting of the insert can compromise the quality of the connection and lead to a brake fluid leak.

The TL-BH62 therefore enables this operation to be carried out using a tool specifically designed for hoses: Shimano.

How do you use the Shimano TL-BH62 tool?

The TL-BH62 must be used in accordance with the Shimano procedure corresponding to the relevant brake model.

Generally speaking, the procedure involves:

1. Determining the required hose length.
2. Securing the hose correctly in the tool.
3. Making a clean, perpendicular cut.
4. Preparing the end of the hose.
5. Fitting the insert designed for the relevant Shimano system.
6. Connect the hose to the lever or caliper.
7. Carry out the necessary bleeding procedures once the hydraulic circuit has been opened.
8. Carefully check that the brake is airtight and functioning correctly before driving.

Important: fitting a hydraulic brake hose is a safety-critical operation. It is essential to use components compatible with the brake model and to follow the manufacturer’s fitting and bleeding procedures.

Our advice: do not treat the TL-BH62 as a simple universal hose cutter. Always check the exact part number of the hose, the insert and the braking system Shimano before carrying out any work. After any opening of the hydraulic circuit, bleeding and a full brake check may be necessary.

Why use a specialised tool for a hydraulic hose?

A clean, precise cut is essential for a reliable connection. Using the correct tool minimises the risk of crushing or deforming the hose during cutting.

Holding the hose in place also makes it easier to insert the fitting and helps ensure a more precise fit.

For a professional, using a specialised tool above all enables work to be carried out quickly and consistently. For a private individual, it allows for a neater job than using unsuitable tools.

Technical specifications