Syncros Campbell 100 rear light

The Campbell 100 can be fitted to the following saddles Syncros, using the bracket supplied and an integrated mounting system.

This system allows for several configurations: the light can be used on its own, with a saddle bag, with a mudguard, or with both at the same time. This modular approach aims to offer a minimalist integration rather than a light fixed in the traditional way to the seat post.

It is therefore specifically designed for riders with Syncros saddles who want a discreet lighting solution that complements their other saddle accessories.

The battery life ranges from 0h50 in High mode to 16h in Light Sensitive mode.

The breakdown by mode is as follows: High offers 0h50 of battery life, Medium 1h30, Low 3h10, Flash 10h, and Light Sensitive up to 16h thanks to the automatic adjustment of brightness according to ambient light levels.

This wide range allows you to strike a balance between light output and runtime depending on the type of ride planned, whether it’s a short daily commute or a longer ride requiring extended battery life.

Sources indicate that the product does not comply with the StVZO standard and is not sold in Germany.

No information regarding compliance with French regulations (NF standard or R.313-41) is provided in the available sources. It is therefore advisable to check this with the manufacturer or retailer before using the product in situations requiring strict approval for night-time cycling in France.

The stated full charging time is 2 hours.

Charging is via a USB-C port, which allows the light to be connected to higher-amp ports. This reduces the charging time compared to a standard micro-USB connection, which is often slower.

The built-in battery is a 750 mAh lithium-polymer battery, which powers the light’s 15 COB LEDs across the 5 available operating modes.

The Campbell 100 weighs approximately 43 g without the mounting bracket.

This low weight reflects the manufacturer’s aim to offer a minimalist lighting solution, designed to fit discreetly onto a Syncros saddle without adding significant weight to the bike.

The dimensions of the light itself are 61 x 52 x 19 mm, which is still compact for a rear light fitted with 15 COB LEDs and a 750 mAh battery.

Yes, the integrated mounting system allows the light to be fitted to a saddle bag Syncros.

This system allows for several configurations: the light can be used on its own, with a saddle bag, with a mudguard, or with both accessories at the same time. This versatility means the setup can be adapted to the cyclist’s needs, whether for light bikepacking or everyday use with a mudguard.

This compatibility makes the Campbell 100 particularly appealing to owners of accessories from the Syncros range who already have compatible saddles fitted.

The Campbell 100 delivers a maximum output of 100 lumens.

This output is distributed across 15 COB LEDs and can be adjusted across the 5 available operating modes: High, Medium, Low, Flash and Light Sensitive. The mode selected directly affects the battery life, ranging from 0h50 at maximum power to 16h in Light Sensitive mode.

This range of brightness is suitable for both urban journeys and rides in the woods or off-road, depending on the cyclist’s visibility requirements.