Genuine Shimano parts
These hand rests, also known as cocottes, are designed for Shimano Ultegra R8070 Di2 disc brake shifters. Their design provides a very reliable grip and excellent handling.
A former racer with a keen eye for equipment
Shimano Ultegra R8070 Di2 disc brake and gear lever handpads are genuine replacement parts designed for Shimano Ultegra Di2 ST-R8070 brake and gear levers.
Manufacturer’s part number Y0E698010, this pair of black rubber grips allows you to replace worn, damaged or simply ageing grips on your 11-speed Shimano Ultegra Di2 hydraulic disc brake shifters.
Thanks to their original Shimano design, these hand rests restore a comfortable grip, effective control and the ergonomics intended for the ST-R8070 levers, without having to replace the entire shifter assembly. Shimano officially identifies part number Y0E698010 as the ‘Bracket Covers’ for the ST-R8070.
Handlebar grips, also known as grips or grip covers, are in direct contact with the cyclist’s hands. Their condition therefore has a significant impact on comfort and grip quality.
Over time, the rubber may lose its original appearance, become less grippy, crack or show signs of wear. Replacing the lever covers therefore gives the levers a new lease of life without having to replace the entire control unit.
Part number Y0E698010 corresponds to part number 5 on the official exploded view diagram for the Shimano ST-R8070 lever and is specified as a set of Bracket Covers (Pair).
These hand rests are specifically designed for the following groupsets:
Shimano Ultegra Di2 ST-R8070 – 2x11-speed – hydraulic disc brakes.
This part is therefore intended for the Ultegra R8000 Di2 11-speed generation, and not for the new Ultegra Di2 12-speed shifters.
Before placing an order, you must check the part number marked on your lever. The official ‘ Shimano ’ compatibility applies to the ST-R8070 model.
Handlebar grips in good condition are essential for maintaining a secure and comfortable grip on your bike.
Shimano ’s shift lever grips provide a surface that allows you to keep a firm grip on the controls, whether in the high position, when accelerating or during long rides.
Replacing old handlebar grips also helps to restore a cleaner, more uniform look to a bike whose mechanical or electronic components are still in perfect working order.
There are several signs that may indicate replacement is necessary:
In these situations, there is no need to replace the entire lever: the ‘ Shimano ’ Y0E698010 lever caps allow you to replace only the affected outer section.
Replacing the hand rests usually involves removing the old lever cover and then positioning the new one correctly on the control.
It is recommended that you proceed with care so as not to damage the rubber during fitting.
Installation does not require the Di2 electronic system itself to be replaced or modified. The hand rest is an external part of the lever.
To ensure a perfect finish, check that the rubber is correctly positioned around the lever body and that the various contact areas are properly in place.
Part number Y0E698010 is sold as a pair, comprising the left and right hand rests.
This is a useful feature when you wish to achieve a perfectly uniform appearance on both sides of the handlebar.
Shimano ’s documentation explicitly identifies this part number as ‘Bracket Covers (Pair)’.
Expert tip: if your grips are simply starting to become shiny or less grippy, don’t wait until they’re completely cracked. Replacing them as a preventative measure helps maintain a good grip and avoids riding with severely worn rubber.
| EAN | 4524667670377 |
|---|
Average rating: 4.8 out of 5
Based on 23 reviews
Show attestation (opens in a new window)
Great.
In line with the description
Excellent product I recommend
Shimano hand rests conform to original quality and are not as hard to install as that.
Does the job
Product meets expectations. It was time for me to change them! The grip of the hoods has nothing to do, I found the ergonomics of the beginnings. However, be careful with the models, there are many types (I made a mistake for my first order) For information: the reference is noted on the inner side of your hand rests. The assembly is not really simple, I was really afraid of damaging them by pulling on them. I used a tire lever to slide them on.
Hand rests conform to my expectations. Thank you for the fairly quick delivery.
Replacement for the old ones. Installation not easy but it gives a fresh look.
Very good
as a replacement after a fall corresponds to the original ones, with spray silicone it mounts well
No review matches this rating.
10 reviews shown out of 23
They are designed for the following shifters Shimano ’ Ultegra Di2 ST-R8070. Shimano officially lists Y0E698010 as the shift lever cover for the ST-R8070.
Yes. This is precisely the replacement part for Ultegra Di2 ST-R8070 orders.
Yes. The ST-R8070 is an Ultegra Di2 shifter designed for hydraulic disc brakes.
Item number Y0E698010 is sold as a pair, comprising a left-hand grip and a right-hand grip.
They are available in black, as per the official product page Shimano.
Yes. This is an original Shimano replacement part designed for the ST-R8070 lever.
No, part number Y0E698010 is intended for the ST-R8070 Di2 11-speed. It should not be considered compatible with the 12-speed Ultegra Di2 generations.
Yes. The Y0E698010 is specifically designed to replace the derailleur covers without having to replace the entire lever assembly.
It isn’t essential if only one side is damaged, but this item is sold as a left/right pair. Replacing both sides ensures a consistent appearance and level of wear.
They restore the original contact surface and grip when the old shift levers are worn out. The retailers Shimano state that these shift lever covers ensure good grip and provide suitable protection for the shifters.
Replacement is relatively straightforward for a bike mechanic used to working on shifters. However, care must be taken not to damage the rubber and to position the lever correctly around the shifter.
Replace them if they show cracks, tears, heavy wear, a loss of grip or deformation. It’s also a good way to restore the comfort of a bike that’s seen a lot of use.
Our team suggests
You may also like
Other products
To discover