700x33 - Aquasur protective coating
Enough for at least 4 wheels
20 years' experience in the world of cycling
This remover allows you to thoroughly clean your rim before fitting a new tyre. It is formulated with non-toxic products and can be used indoors without exposing you to any health risks. It is also highly effective without damaging aluminium or carbon.
This remover is very easy to apply thanks to its viscosity and red colour, which allows you to identify surfaces that have already been treated. After application, adhesive residue can be easily removed with a simple cloth. Technical characteristics:- Non-toxic product suitable for indoor use- Does not attack carbon or aluminium
- High viscosity and red colour
- Capacity: 150 ml (for 4 to 8 wheels)
- Brand: Effetto Mariposa
| EAN | 7640164680484 |
|---|
Average rating: 4.4 out of 5
Based on 19 reviews
Show attestation (opens in a new window) Good if there is not too much glue. Less effective on double-sided tape. Unless you let it act longer, but how long? RD
Products work well when there are only traces of glue, it doesn't help much to remove all the glue from the rim.
The best solvent
Effective, respects the waiting time after application +3 hours, pleasant to apply, no petroleum smell. For stripping on tubulars, it's less effective, you have to scrub with a brush.
I recommend removing as much as possible before applying and letting the product act well (more than 3 hours). With that, the product works very well.
Used for the first time, very effective while respecting the action time. I recommend it.
Medium stripper, you still have to scrub to remove the old glue. I finished with a solvent to remove the last residues, needs a bit more efficiency.
I was tired of the gluing procedures for new tubulars, and I decided to switch to adhesive strips. I used this product to clean the glue from my carbon wheels... Not disappointed because after a certain contact time (several hours), the glue softens well and can be removed much better than with anything I had tried before... A bit of elbow grease, repeat the operation twice (there was a lot of glue ;), and my wheels are like new ready to welcome my new tubulars.
very effective as long as you let it penetrate sufficiently.
You need to remove as much as possible before using the product. It's not magic but works well
No review matches this rating.
10 reviews shown out of 19
Our team suggests
You may also like
Other products
To discover