The benchmark product from Muc Off!
Clamp mounting: 28.6, 31.8 and 34.9 mm
Road specialist
The derailleur before Shimano Altus FD-M313 is designed for ensure some changes from trays fluids and reliable on the Mountain biking and Private hire vehicle Equipped of a transmission To triple tray and of a cassette from 7 or 8 speeds. From from the range Shimano Altus , , he constitutes one solution practical for replace a derailleur worn out or hand over in Status one transmission mechanics.
Thanks To her design To necklace top and To sound system from print run Dual Jumper, the Shimano FD-M313 adapts To various configurations from executive and from progress from the cable. He enables from to pass of a tray To the other one so that from to arrange of a development suitable to the climbs, to the portions rolling and to the route hilly.
Her design prioritises the simplicity for use, the reliability and the ease maintenance. He is suitable and so on to the cyclists looking for a component functional for their outings in Mountain biking, their travel daily newspapers or their hikes To cycle.
The reference EFDM313X6 corresponds to To the version scheduled for a angle from base from 66 To 69°, with a necklace from fastening from 34.9 mm and some adapters enabling the editing on some tubes from diameter lower.
Transmission triple tray : enables from manage three trays before for benefit from of a wide beach from developments.
Compatibility 7/8 speeds : suitable to the transmissions mechanical To 7 or 8 sprockets rear.
Print run Dual Jumper : accepts a cable coming from the top or from the low, according to the editing from the cycle.
Necklace top : fastening around from the tube from saddle for one installation classic and sturdy.
Adapters included : possibility from editing on some tubes from saddle from 28.6 mm and 31.8 mm.
Design Shimano Altus : one solution functional for the hiking, the Mountain biking leisure and the journeys daily newspapers.
The FD-M313 offer and so on one solution versatile for preserve one transmission To triple tray without duty replace the whole some components.
| Feature | Details |
|---|---|
| Brand | Shimano |
| Range | Altus |
| Model | FD-M313 |
| Reference manufacturer | EFDM313X6 |
| Type from component | Derailleur before Mountain biking |
| Number from trays | 3 |
| Compatibility rear | 7 and 8 speeds |
| Type from order | Mechanics by cable |
| Type from print run | Dual Jumper : top or low |
| Fastening | Necklace top |
| Diameter from the necklace | 34.9 mm |
| Adapters provided | 31.8 mm and 28.6 mm |
| Angle from the tube from saddle | 66 To 69° |
| Line from chain | 50 mm |
| Capacity total | 20 teeth |
| Size maximum from the large tray | 48 teeth |
| Colour | Black and money |
| Usage | Mountain biking, Private hire vehicle and hike |
The Shimano Altus FD-M313 facilitates the use of a transmission To three trays, in particular when the route alternates between climbs, paths rolling and runs. The change from tray enables to adapt the pedalling to the various difficulties encountered.
Sound system Dual Jumper represents a advantage when from the replacement of a former derailleur : he enables from hold account from the progress from the cable existing, that he is coming by the top or by the low. The adapters from necklace offer Also more from possibilities from editing on various diameters from tube from saddle.
For to obtain a operation optimal, he remains essential from respect the compatibility with the trays, the line from chain and the geometry from the frame.
| Tray compatibility | triple chainring |
|---|---|
| Speed compatibility | 7-8v |
| Drawing | top-bottom |
| EAN | 4524667610878 |
| Supplier reference | EFDM313X6 |
Average rating: 5 out of 5
Based on 1 review
Show attestation (opens in a new window) not yet installed
No review matches this rating.
1 review shown out of 1
Ces deux références correspondent à des variantes du Shimano FD-M313 adaptées à des angles de tube de selle différents. La version X3 convient à un angle de 63 à 66°, tandis que la version X6 est prévue pour un angle de 66 à 69°. Il est donc important de choisir la bonne version selon la géométrie du cadre.
Le diamètre peut être vérifié dans la documentation du vélo ou mesuré avec un pied à coulisse sur la zone où le dérailleur sera fixé. Les adaptateurs fournis permettent de couvrir plusieurs diamètres, mais il faut utiliser celui qui correspond précisément au cadre.
Oui. La hauteur, l’orientation de la fourchette, les butées et la tension du câble doivent être réglées pour obtenir un passage de plateau fluide et éviter les frottements de chaîne.
Oui, si elles sont compatibles avec une transmission mécanique à trois plateaux et le fonctionnement du dérailleur Shimano. Il faut vérifier le tirage du câble et la compatibilité de la commande avant le montage.
Ce phénomène peut provenir d’un mauvais réglage des butées, d’une tension de câble incorrecte ou d’une combinaison de rapports qui place la chaîne à un angle important. Un réglage précis du dérailleur permet généralement de réduire ces frottements.
Our team suggests
You may also like
Other products
To discover