Shimano port cover for Di2 12-speed front derailleur R9250 and R8150 - Y2JP06000

Shimano Y2JP06000 is a cable end cap for the Shimano Di2 12-speed front derailleur, designed for the brand’s high-end electronic systems.

This small spare part is intended for the Shimano Dura-Ace FD-R9250 and Shimano Ultegra FD-R8150 front derailleurs, two models from the 12-speed Di2 generation. Shimano It is listed as ‘Plug cover’, under part number 1 in the front derailleur exploded view.

The cover helps to keep the connector area protected when it is not in use. It is therefore a particularly useful part in the event of the original cover being lost, broken or damaged.

Rather than replacing the entire front derailleur, it is possible to replace just this small part when the derailleur’s mechanism and electronics are functioning normally.

The Y2JP06000 is a compact part, specifically designed to fit compatible front derailleurs and maintain the distinctive look of the Shimano Di2 groupsets.

Key features of the Shimano Y2JP06000

• Genuine Shimano spare part.
• Connector cover for Di2 front derailleur.
• Compatible with the Dura-Ace FD-R9250 and Ultegra FD-R8150 front derailleurs.
• Designed for 12-speed Di2 drivetrains.
• Replaces a lost or damaged cover.
• Avoids the need to replace the entire front derailleur.
• A compact part, specially designed for the relevant models.
• Shimano: Y2JP06000.
• EAN: 4550170233457.

Shimano Officially identifies the Y2JP06000 as the Plug Cover for the FD-R8150 and FD-R9250 front derailleurs. Both models use this same part, with full interchangeability indicated in the Shimano exploded view diagram.

An essential spare part for Di2

In an electronic drivetrain system such as the Shimano Di2, the connectors are key components of the groupset’s cabling and operation. The cover helps maintain a neat finish around the front derailleur and protects the connection area when not in use.

Replacing the cover is therefore particularly important if it has been lost during mechanical work, cleaning or when transporting the bike.

With this spare part, there is no need to replace the entire derailleur simply to recover its original cover.

Shimano compatibility: Y2JP06000

Part number Y2JP06000 is designed for the following front derailleurs:

• Shimano Dura-Ace FD-R9250 Di2;
• Shimano Ultegra FD-R8150 Di2.

Both derailleurs belong to the 12-speed Di2 generation and use the same lever cover.

Please note regarding compatibility

The Y2JP06000 should not be regarded as a universal Di2 cover. It is specifically designed for the FD-R9250 and FD-R8150 models.

In particular, it must not be confused with parts intended for other generations or other Di2 ‘ Shimano ’ models. A dedicated product sheet states, for example, that this part number is not intended for the 105 Di2 FD-R7150 front derailleur. Shimano

Before placing an order, please check the part number on your derailleur.

Our advice: before ordering, you must check the part number of your front derailleur. If you have a Dura-Ace FD-R9250 or an Ultegra FD-R8150, the part number to look for for the cable guide is Y2JP06000.

Technical specifications