Motorex Bike Clean 500ml bike cleaning spray

MOTOREX BIKE CLEAN 500mlis a fast-acting bike cleaner designed to effectively remove dirt, mud and grease or oil residues from your bike. Its biodegradable, solvent-free formula penetrates the dirt, softens it and makes it easier to remove, even when it is dry and caked on.

Particularly suitable for mountain bikes, road bikes, gravel bikes, hybrid bikes and e-bikes, BIKE CLEAN is ideal after an off-road ride or in poor weather conditions. Its excellent compatibility with materials and its tested suitability for use on carbon fibre mean it cleans the bike effectively whilst protecting its various components.

Key features of MOTOREX BIKE CLEAN

• Fast-acting bike cleaner
• Removes mud, dirt, dust, oil and grease
• Biodegradable, solvent-free formula
• VOC-free
• Good material compatibility
• Suitable for carbon frames
• Ideal for mountain bikes, gravel bikes, road bikes and e-bikes
• Convenient 500 mlbottle
• Particularly suitable after muddy rides or in bad weather

How to use MOTOREX BIKE CLEAN?

Spray MOTOREX BIKE CLEAN onto the dirty bike, then leave it to work for around 3 minutes, depending on how dirty it is. Avoid working in direct sunlight and do not let the product dry on the surfaces.

Then rinse thoroughly with water using a gentle spray, keeping a distance of at least 20 cm. Avoid directing the water directly at the bearings and axles. MOTOREX strongly advises against the use of a high-pressure washer.

Once the bike is clean and dry, remember to re-lubricate the chain and drivetrain components to minimise the risk of corrosion.

FAQ – MOTOREX BIKE CLEAN bicycle cleaner

Is MOTOREX BIKE CLEAN suitable for mountain bikes?

Yes. BIKE CLEAN is particularly suitable for bikes used off-road and after rides in muddy conditions or in bad weather.

Can BIKE CLEAN be used on a carbon bike?

Yes. MOTOREX states that the product has been tested on carbon and is highly compatible with the materials.

Does BIKE CLEAN contain solvents?

No. Its formula is solvent-free and VOC-free, whilst remaining highly effective against dirt and oil and grease residues.

How long should the cleaner be left to work?

MOTOREX recommends leaving the product to work for around 3 minutes, depending on how dirty the bike is. It must not be allowed to dry on the surface and must not be used in direct sunlight.

Can a high-pressure washer be used after applying BIKE CLEAN?

No, this is strongly discouraged. Instead, rinse with water using a gentle spray to protect the bearings and axles in particular.

Should the chain be lubricated after cleaning?

Yes. After rinsing and drying the bike thoroughly, it is recommended that you re-lubricate the chain and drivetrain.